LeeSti Angle

LeeSti Angle is a lighting system in aluminum extrusion with proprietary LED boards. Diffuser with film for not seeing LED. Programmable drivers allow the use of special outputs with the same hardware and kit (programmable at factory). Trim and Trimless versions. Three possible angles (15,30 and 45 degree) specified by designer and fixed so no changes at job site.

LeAn
LeeSti Angle

Lumen Output

3017 - 3000 K 1200 lumens / ft 12 w /ft
3014 - 3000 K 1000 lumens / ft 10 w /ft
3011 - 3000 K 780 lumens / ft 7.5 w /ft
3008 - 3000 K 560 lumens / ft 5.5w /ft
3005 - 3000 K 350 lumens / ft 3.1 w /ft
3517 - 3500 K 1200 lumens / ft 12 w /ft
3514 - 3500 K 1000 lumens / ft 10 w /ft
3511 - 3500 K 780 lumens / ft 7.5 w /ft
3508 - 3500 K 560 lumens / ft 5.5w /ft
3505 - 3500 K 350 lumens / ft 3.1 w /ft
WhTu - White tuning 2700K @ 1050 lumens/foot and 6500k @1200 lumens/foot 12.5 watt/foot

Finish

Custom
WH - White
BK - Black
CU - Custom Color - Specify RAL color

Dimming

O - Non dimmable 120v
1 - Non dimmable 277v
4 - Dimmable 0-10v (4wires, 120 or 277 v)

Flange

Ts - Trimless
Tm - Trim

Aiming Angle

15d - Angle 15 degree from Vertical
30d - Angle 30 degree from Vertical
45d - Angle 45 degree from Vertical

Runs

No. of A - 1' nominal 11 5/8"
No. of B - 2' nominal 23 5/8
No. of C - 3' nominal 34 1/8
No. of D - 4' nominal 46 1/8"
No. of E - 5' nominal 56 5/8"
No. of F - 6' nominal 68 5/8"
No. of G - 7' nominal 79 1/8"
No. of H - 8' nominal 91 1/8"
(0)A (0)B (0)C (0)D (0)E (0)F (0)G (0)H

Light Shielding

Dd - Frosted diffuser - Use if reflected surface is gloss so dots of boards are not seen
Nof - No film - No film to use indirect if surface is not gloss so dots can't be seen as a reflection

Emergency

No. of 00 - No Emergency
No. of EM - Emergency - Specify qty only if Emergency
(0)00 (0)EM
 


Login


Email
Password